动车组牵引电机轴承温升故障分析及解决措施
朱彦1,2沈迪2王田天1
Analysis of Temperature Rise Fault of EMU Traction Motor Bearing and Solutions
ZHU YanSHEN DiWANG Tiantian
-
作者信息:1.1.中南大学交通运输工程学院， 410018， 长沙;
2.2.中车长春轨道客车股份有限公司国家轨道客车工程研究中心，130062， 长春
-
Affiliation:School of Traffic & Transportation Engineering, Central South University, 410018, Changsha, China
-
关键词:
-
Key words:
-
DOI:10.16037/j.1007-869x.2023.04.027
-
中图分类号/CLCN:U266.233.1+2
-
栏目/Col:应用技术
摘要:
针对某型动车组牵引电机轴承温升故障，从轴承结构、注脂量和频次、轴电压影响及脉动扭矩校核等方面进行调查，分析导致轴承损伤引发故障的原因。分析结果显示，在微弱电流、轴承高温运转等因素持续作用下，加速了润滑脂的老化，导致轴承润滑不良，严重时轴承出现白蚀裂纹，最终导致轴承疲劳失效。针对故障原因，提出优化润滑、增大绝缘层厚度、增加保护接地等解决措施。
Abstracts:
In view of the temperature rise fault of traction motor bearing of certain type of EMU (electric multiple unit), investigation is carried out from the aspects including bearing structure, grease injection amount and frequency, influence of shaft voltage, pulsating torque check to find out the cause of bearing damage and the consequent faults. Analysis results show that under the continuous action of weak current, high temperature operation of bearing and other factors, the aging of lubricating grease is accelerated, resulting in poor lubrication of bearing. In serious cases, white corrosion fractures appear on the bearing, and finally lead to bearing fatigue failure. According to the fault causes, measures such as optimizing lubrication, increasing the thickness of insulation layer and increasing protective grounding are proposed.
- 上一篇: 高铁物流运输模式及其可行性
- 下一篇: 数字时代新征程
过刊浏览
资料下载
友情链接