基于冗余编码系统的循环冗余校验方法
夏伟蒋建金傅林泰张磊
CRC Verification Method Based on Redundant Coding System
XIA WeiJIANG JianjinFu LintaiZhang Lei
-
作者信息:卡斯柯信号有限公司，200071，上海
-
Affiliation:CASCO Signal Co., Ltd., 200071, Shanghai, China
-
关键词:
-
Key words:
-
DOI:10.16037/j.1007-869x.2019.08.031
-
中图分类号/CLCN:U231.7
-
栏目/Col:研究报告
摘要:
提出了一种基于冗余编码系统的循环冗余校验(CRC)方法。该方法应用于轨道交通信号控制系统中可解决冗余编码系统与其他类型冗余编码或非冗余编码系统的通信问题，通过将冗余码校验信息融合到CRC计算过程中，在无故障的情况下得出的冗余码CRC与标准CRC完全一致，保证了系统与外界系统的正常通信功能；在系统发生故障的情况下能够将错误信息反馈到冗余码CRC中，外界冗余/非冗余系统可校验出故障信息，提高了系统的安全性和故障可检测率。
Abstracts:
A CRC (cyclic redundancy check) verification method based on redundant coding system is presented, the application of this method to the rail traffic signal control system will solve communication problems between the redundant coding system and other types of redundant coding or the non-redundant coding system. By integrating the redundancy check information into the CRC computing process, the redundant coding CRC obtained in fault-free situation is exactly the same as the standard CRC, and could ensure the normal communication function. While in case of system failure, the error information can be fed into the redundant coding CRC, the external redundancy / non-redundant system will verify the fault information, thus improve the system security and the fault detection rate.
引文 / Ref:
夏伟，蒋建金，傅林泰，张磊.基于冗余编码系统的循环冗余校验方法[J].城市轨道交通研究，2019，22(08):141.
XIA Wei，JIANG Jianjin，Fu Lintai，et al.CRC verification method based on redundant coding system[J].Urban Mass Transit，2019，22(08)：141.
XIA Wei，JIANG Jianjin，Fu Lintai，et al.CRC verification method based on redundant coding system[J].Urban Mass Transit，2019，22(08)：141.
- 上一篇: 高速磁浮交通技术标准体系研究*
- 下一篇: 高速磁浮列车悬浮导向传感器故障定位系统研究*
过刊浏览
资料下载
友情链接