激光焊接技术在轨道交通车辆中的应用
王洪潇王春生何广忠高文文程国利
Application of Laser Welding Technology in Rail Transit Vehicles
WANG HongxiaoWANG ChunshengHE GuangzhongGAO WenwenCHEN Guoli
-
作者信息:中车长春轨道客车股份有限公司工程规划发展部，130062，长春
-
Affiliation:CRRC Changchun Railway Vehicles Co.，Ltd.，130062，China
-
关键词:
-
Key words:
-
DOI:10.16037/j.1007-869x.2020.04.021
-
中图分类号/CLCN:U270.6; TG456.7
-
栏目/Col:应用技术
摘要:
为解决轨道交通车辆不锈钢车体电阻点焊的外观质量差、密封性差、效率低等缺点，对部分熔透激光焊接工艺在不锈钢车体焊接中的应用开展了研究。研究包括：部分熔透激光叠焊原理、参数优化试验、显微组织分析、疲劳性能分析，以及激光焊接不锈钢车辆侧墙的结构改进。研究结果表明，不锈钢车体焊接中采用部分熔透激光叠焊工艺，可以获得高质量的表面状态及疲劳强度，车体结构强度高于EN12663标准中的要求。
Abstracts:
In order to solve the defects in resistance spot welding of the stainless steel rail vehicles，such as the poor appearance，poor sealing and low efficiency，the application of partial penetration lap laser welding technology in rail transit stainless steel vehicle car-body welding is studied，including the principle of partial penetration laser stack welding， parameter optimization test， micro-structure analysis，fatigue performance analysis and the structural improvement of laser welding stainless steel vehicle sidewall are systematically studied. The research results show that the surface condition and fatigue strength of the car-body are improved，the car-body structural strength is higher than the requirements of En12663 standard.
引文 / Ref:
王洪潇，王春生，何广忠，等.激光焊接技术在轨道交通车辆中的应用[J].城市轨道交通研究，2020，23（4）：85.
WANG Hongxiao，WANG Chunsheng，HE Guangzhong，et al.Application of Laser Welding Technology in Rail Transit Vehicles[J].Urban mass transit，2020，23（4）：85.
WANG Hongxiao，WANG Chunsheng，HE Guangzhong，et al.Application of Laser Welding Technology in Rail Transit Vehicles[J].Urban mass transit，2020，23（4）：85.
- 上一篇: 高铁物流运输模式及其可行性
- 下一篇: 强力推进智慧城市轨道交通建设
过刊浏览
资料下载
友情链接